pub struct NativeCurrencyWithEd;

Trait Implementations§

source§

impl Currency<<<MultiSignature as Verify>::Signer as IdentifyAccount>::AccountId> for NativeCurrencyWithEd

§

type Balance = <CurrencyAdapter<Runtime, GetNativeCurrencyId> as Currency<<<MultiSignature as Verify>::Signer as IdentifyAccount>::AccountId>>::Balance

The balance of an account.
§

type NegativeImbalance = <CurrencyAdapter<Runtime, GetNativeCurrencyId> as Currency<<<MultiSignature as Verify>::Signer as IdentifyAccount>::AccountId>>::NegativeImbalance

The opaque token type for an imbalance. This is returned by unbalanced operations and must be dealt with. It may be dropped but cannot be cloned.
§

type PositiveImbalance = <CurrencyAdapter<Runtime, GetNativeCurrencyId> as Currency<<<MultiSignature as Verify>::Signer as IdentifyAccount>::AccountId>>::PositiveImbalance

The opaque token type for an imbalance. This is returned by unbalanced operations and must be dealt with. It may be dropped but cannot be cloned.
source§

fn total_balance(who: &AccountId) -> Self::Balance

The combined balance of who.
source§

fn can_slash(who: &AccountId, value: Self::Balance) -> bool

Same result as slash(who, value) (but without the side-effects) assuming there are no balance changes in the meantime and only the reserved balance is not taken into account.
source§

fn total_issuance() -> Self::Balance

The total amount of issuance in the system.
source§

fn active_issuance() -> Self::Balance

The total amount of issuance in the system excluding those which are controlled by the system.
source§

fn deactivate(x: Self::Balance)

Reduce the active issuance by some amount.
source§

fn reactivate(x: Self::Balance)

Increase the active issuance by some amount, up to the outstanding amount reduced.
source§

fn minimum_balance() -> Self::Balance

The minimum balance any single account may have. This is equivalent to the Balances module’s ExistentialDeposit.
source§

fn burn(amount: Self::Balance) -> Self::PositiveImbalance

Reduce the total issuance by amount and return the according imbalance. The imbalance will typically be used to reduce an account by the same amount with e.g. settle. Read more
source§

fn issue(amount: Self::Balance) -> Self::NegativeImbalance

Increase the total issuance by amount and return the according imbalance. The imbalance will typically be used to increase an account by the same amount with e.g. resolve_into_existing or resolve_creating. Read more
source§

fn pair( amount: Self::Balance ) -> (Self::PositiveImbalance, Self::NegativeImbalance)

Produce a pair of imbalances that cancel each other out exactly. Read more
source§

fn free_balance(who: &AccountId) -> Self::Balance

The ‘free’ balance of a given account. Read more
source§

fn ensure_can_withdraw( who: &AccountId, _amount: Self::Balance, reasons: WithdrawReasons, new_balance: Self::Balance ) -> DispatchResult

Returns Ok iff the account is able to make a withdrawal of the given amount for the given reason. Basically, it’s just a dry-run of withdraw. Read more
source§

fn transfer( source: &AccountId, dest: &AccountId, value: Self::Balance, existence_requirement: ExistenceRequirement ) -> DispatchResult

Transfer some liquid free balance to another staker. Read more
source§

fn slash( who: &AccountId, value: Self::Balance ) -> (Self::NegativeImbalance, Self::Balance)

Deducts up to value from the combined balance of who, preferring to deduct from the free balance. This function cannot fail. Read more
source§

fn deposit_into_existing( who: &AccountId, value: Self::Balance ) -> Result<Self::PositiveImbalance, DispatchError>

Mints value to the free balance of who. Read more
source§

fn resolve_into_existing( who: &AccountId, value: Self::NegativeImbalance ) -> Result<(), Self::NegativeImbalance>

Similar to deposit_creating, only accepts a NegativeImbalance and returns nothing on success.
source§

fn deposit_creating( who: &AccountId, value: Self::Balance ) -> Self::PositiveImbalance

Adds up to value to the free balance of who. If who doesn’t exist, it is created. Read more
source§

fn resolve_creating(who: &AccountId, value: Self::NegativeImbalance)

Similar to deposit_creating, only accepts a NegativeImbalance and returns nothing on success.
source§

fn withdraw( who: &AccountId, value: Self::Balance, reasons: WithdrawReasons, liveness: ExistenceRequirement ) -> Result<Self::NegativeImbalance, DispatchError>

Removes some free balance from who account for reason if possible. If liveness is KeepAlive, then no less than ExistentialDeposit must be left remaining. Read more
source§

fn settle( who: &AccountId, value: Self::PositiveImbalance, reasons: WithdrawReasons, liveness: ExistenceRequirement ) -> Result<(), Self::PositiveImbalance>

Similar to withdraw, only accepts a PositiveImbalance and returns nothing on success.
source§

fn make_free_balance_be( who: &AccountId, balance: Self::Balance ) -> SignedImbalance<Self::Balance, Self::PositiveImbalance>

Ensure an account’s free balance equals some value; this will create the account if needed. Read more
source§

impl Inspect<<<MultiSignature as Verify>::Signer as IdentifyAccount>::AccountId> for NativeCurrencyWithEd

§

type Balance = u128

Scalar type for representing balance of an account.
source§

fn total_issuance() -> Self::Balance

The total amount of issuance in the system.
source§

fn active_issuance() -> Self::Balance

The total amount of issuance in the system excluding those which are controlled by the system.
source§

fn minimum_balance() -> Self::Balance

The minimum balance any single account may have.
source§

fn total_balance(who: &AccountId) -> Self::Balance

Get the total amount of funds whose ultimate beneficial ownership can be determined as who. Read more
source§

fn balance(who: &AccountId) -> Self::Balance

Get the balance of who which does not include funds which are exclusively allocated to subsystems of the chain (“on hold” or “reserved”). Read more
source§

fn reducible_balance( who: &AccountId, preservation: Preservation, force: Fortitude ) -> Self::Balance

Get the maximum amount that who can withdraw/transfer successfully based on whether the account should be kept alive (preservation) or whether we are willing to force the reduction and potentially go below user-level restrictions on the minimum amount of the account. Read more
source§

fn can_deposit( who: &AccountId, amount: Self::Balance, provenance: Provenance ) -> DepositConsequence

Returns true if the balance of who may be increased by amount. Read more
source§

fn can_withdraw( who: &AccountId, amount: Self::Balance ) -> WithdrawConsequence<Self::Balance>

Returns Success if the balance of who may be decreased by amount, otherwise the consequence.
source§

impl ReservableCurrency<<<MultiSignature as Verify>::Signer as IdentifyAccount>::AccountId> for NativeCurrencyWithEd

source§

fn can_reserve(who: &AccountId, value: Self::Balance) -> bool

Same result as reserve(who, value) (but without the side-effects) assuming there are no balance changes in the meantime.
source§

fn slash_reserved( who: &AccountId, value: Self::Balance ) -> (Self::NegativeImbalance, Self::Balance)

Deducts up to value from reserved balance of who. This function cannot fail. Read more
source§

fn reserved_balance(who: &AccountId) -> Self::Balance

The amount of the balance of a given account that is externally reserved; this can still get slashed, but gets slashed last of all. Read more
source§

fn reserve(who: &AccountId, value: Self::Balance) -> DispatchResult

Moves value from balance to reserved balance. Read more
source§

fn unreserve(who: &AccountId, value: Self::Balance) -> Self::Balance

Moves up to value from reserved balance to free balance. This function cannot fail. Read more
source§

fn repatriate_reserved( slashed: &AccountId, beneficiary: &AccountId, value: Self::Balance, status: BalanceStatus ) -> Result<Self::Balance, DispatchError>

Moves up to value from reserved balance of account slashed to balance of account beneficiary. beneficiary must exist for this to succeed. If it does not, Err will be returned. Funds will be placed in either the free balance or the reserved balance, depending on the status. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Any for Twhere T: Any,

§

fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>

§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>

§

fn type_name(&self) -> &'static str

§

impl<T> AnySync for Twhere T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync + 'static>

source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> Downcast for Twhere T: Any,

§

fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync + 'static>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> Pipe for Twhere T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

§

impl<T> MaybeSend for Twhere T: Send,