#[non_exhaustive]pub struct Params {
pub network: Network,
pub bip16_time: u32,
pub bip34_height: u32,
pub bip65_height: u32,
pub bip66_height: u32,
pub rule_change_activation_threshold: u32,
pub miner_confirmation_window: u32,
pub pow_limit: Work,
pub pow_target_spacing: u64,
pub pow_target_timespan: u64,
pub allow_min_difficulty_blocks: bool,
pub no_pow_retargeting: bool,
}
Expand description
Parameters that influence chain consensus.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.network: Network
Network for which parameters are valid.
bip16_time: u32
Time when BIP16 becomes active.
bip34_height: u32
Block height at which BIP34 becomes active.
bip65_height: u32
Block height at which BIP65 becomes active.
bip66_height: u32
Block height at which BIP66 becomes active.
rule_change_activation_threshold: u32
Minimum blocks including miner confirmation of the total of 2016 blocks in a retargeting period, (nPowTargetTimespan / nPowTargetSpacing) which is also used for BIP9 deployments. Examples: 1916 for 95%, 1512 for testchains.
miner_confirmation_window: u32
Number of blocks with the same set of rules.
pow_limit: Work
Proof of work limit value. It contains the lowest possible difficulty.
Note that this value differs from Bitcoin Core’s powLimit field in that this value is attainable, but Bitcoin Core’s is not. Specifically, because targets in Bitcoin are always rounded to the nearest float expressible in “compact form”, not all targets are attainable. Still, this should not affect consensus as the only place where the non-compact form of this is used in Bitcoin Core’s consensus algorithm is in comparison and there are no compact-expressible values between Bitcoin Core’s and the limit expressed here.
pow_target_spacing: u64
Expected amount of time to mine one block.
pow_target_timespan: u64
Difficulty recalculation interval.
allow_min_difficulty_blocks: bool
Determines whether minimal difficulty may be used for blocks or not.
no_pow_retargeting: bool
Determines whether retargeting is disabled for this network or not.
Implementations§
Trait Implementations§
Auto Trait Implementations§
impl RefUnwindSafe for Params
impl Send for Params
impl Sync for Params
impl Unpin for Params
impl UnwindSafe for Params
Blanket Implementations§
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,
self
, then passes self.as_mut()
into the pipe
function.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
unchecked_from
.